new guy with a possibly dumb question.
Moderators: FORDification, 70_F100
-
crazyredneckanyhow
- New Member
- Posts: 1
- Joined: Thu Oct 25, 2012 4:24 pm
new guy with a possibly dumb question.
I just picked up a bw t-18 from an 80s ford. Not sure what year but it does have a 302 bellhousing with the slave cyl mount. I didnt get the transfer case or the stand that goes between the trans and transfer. What i need to know is if a np205 and the stand from an np425 will bolt directly up. Ive looked at the tech articals and searched here but i cant seem to find out the direct answer. Thanks.
-
mmerlinn
- New Member
- Posts: 190
- Joined: Thu Jan 22, 2009 11:45 am
- Contact:
Re: new guy with a possibly dumb question.
Probably not since the T19 was made by Borg Warner and the NP425 was made by New Process, a Chrysler company.
mmerlinn (http://mmerlinn.com/catalog/makeridx.htm)
"People who are careless and sloppy writers are usually also careless and sloppy at thinking. Answering questions for careless and sloppy thinkers is not rewarding." - Eric Steven Raymond
"People who are careless and sloppy writers are usually also careless and sloppy at thinking. Answering questions for careless and sloppy thinkers is not rewarding." - Eric Steven Raymond
-
randyj68
- New Member
- Posts: 232
- Joined: Wed Feb 16, 2011 6:36 pm
- Location: Four Oaks, NC
Re: new guy with a possibly dumb question.
Only dumb question is the one you don't ask
"Ashes to ashes, dust to dust, if it wasn't for chevy's our tools would rust".