New Engine for The "Speed Bump"!
Moderator: FORDification
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I got back to work on the Speed Bump today after spending the last two weekends in Ft Lauderdale. I finished making/running the fuel lines from the tank to the carb today. I ran -8 braided stainless line from the tank to the filter/pump, then 1/2 aluminum line to the regulator, and finally -8 stainless to the carb.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: New Engine for The "Speed Bump"!
SWEET! Awesome set up man!
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I got the plugs and wires installed today. It was nice and sunny out so I opened the garage doors for a few shots. That Ford Blue really pops in the sunlight! 
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
LANCE65
- Preferred User
- Posts: 462
- Joined: Wed Dec 27, 2006 12:00 pm
- Location: SoCal
Re: New Engine for The "Speed Bump"!
That is gonna be badass!
2015 Camaro-2001 GMC Safari-1984 F250 6.9/T19 2wd-1974 Dodge D100 short fleetside~ 72 wife ~ late model kids, a Chocolate Lab named Coco and a white rabbit named Marshmallow...now I need a ferret named Graham and I will have S'mroes!!!..
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I got some more chrome powder coating done today. I did the tail gate latches and pivots/mounts.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I pulled the engine and cab off this weekend in preparation for paint.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I decided to take advantage of the cab being off and took some pictures from the rear of the engine. 
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
Kraig
- New Member
- Posts: 171
- Joined: Sun Jan 02, 2005 9:10 pm
- Location: Maryland
Re: New Engine for The "Speed Bump"!
Looks good in person too!
1969 F100 Ranger LWB Big Block, factory bucket seats and behind seat storage (arrived 3/21/12) (and it was free!)
1986 Thunderbird Turbo Coupe 247K and still going strong! (sold with 251,758 miles on it!)
1986 Comp Prep SVO Mustang (1 of 83) "the original Fox body "R" model!!"
1972 Ford F-100 LWB SOLD 5/2/6
1995 F150 XLT Supercab (wanna trade for a Bump?)
1986 Thunderbird Turbo Coupe 247K and still going strong! (sold with 251,758 miles on it!)
1986 Comp Prep SVO Mustang (1 of 83) "the original Fox body "R" model!!"
1972 Ford F-100 LWB SOLD 5/2/6
1995 F150 XLT Supercab (wanna trade for a Bump?)
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I did some painting on the Speed Bump this weekend. I painted inside the cab, the inside of the doors and under the hood.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I painted the Speed Bump last night.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
Now it's time to start putting it back together.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I got the cab and bed back on the frame. I also started coloring sanding the Speed Bump to get it ready to be buffed.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
hazelnut
- 100% FORDified!
- Posts: 1928
- Joined: Fri Oct 23, 2009 1:06 am
- Location: Williamsburg,Virginia
Re: New Engine for The "Speed Bump"!
Paint looks nice. White always looks good on bumps. The pieces you powder coated, Did you do them yourself or send them out to be done ?
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I powder coated them myself. I bought the powder coating gun from Harbor Freight when it was on sale and it works great with no issues.
http://www.harborfreight.com/10-30-psi- ... 94244.html
http://www.harborfreight.com/10-30-psi- ... 94244.html
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
-
SVT522
- Preferred User
- Posts: 267
- Joined: Sat Oct 30, 2004 4:25 pm
- Location: Delaware, Magnolia
Re: New Engine for The "Speed Bump"!
I got some more color sanding done this weekend. I also ordered all the weatherstrip/seals so I can assemble it after it gets buffed out.
You do not have the required permissions to view the files attached to this post.
SVT522
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4
ASE Master Automotive & Medium/Heavy Truck Technician
"The Speed Bump" 1967 F100 - 466 "Cobrajet", C-6 trans, 4.11 Detroit Locker
1969 F100 4x4 - 360, NP435, Dana 21
1973 Mach1 - 351 CJ, C-6, 9-Inch
1996 SVT Cobra #522
1987 F-250 4X4