'69 Ranger part out, Shop liquidation!!!!

[kuz367]

Hello all,

Parting out a complete '69 Ranger and cleaning out the shop Here's a list of what needs to go!!

360 longblock-timing gears broken, 5 bent pushrods $50

ASK IF YOU WOULD LIKE PICS
C-4 w/32k PO says it worked well $75
3-spd running in my truck now $75
3-spd shift linkage

9" gear sets or third memebers or differentials
3.23 ratio
3.56 or is it 3.55 ?
3.73 $100 each
Axles out of above $30each
Axle housings $100each

2-Complete drum brake suspensions from F100's one '69 and one '70 $50each
Flex-o springs from '69 Ranger $50
'69 Cab TOP ONLY -Very good condition-No rust anywhere $50


'69 Ranger interior parts WOODGRAIN TRIM!!!!
Window cranks $10
Door handles $10
Door releases $20pair
Door hinges $25each
Dash switches w/bezels $15
Ranger glove box doors w/emblems $25each-1 left
glove box liner $5each
hazard switch $5
Window regulators $30each
Woodgrain ranger door panels, dark red good condition $50pair
Wiring harnesses Dash harness $50--Engine harnesses $30each
2-spd wiper motor $75
HVACassembly-Box w/heater core in it $40

Manual steering 3-spd column

Various trim, linkages, brackets, clips, etc.....also available. Please send PM's. Shipping is from 64015. Payment by Paypal. E-mail is xxxxxxxxxxxxx. IF YOU HAVE AN ISSUE W/THE PRICE, LET ME KNOW. MOST OF IT GOES TO THE SCRAPPER IN 30 DAYS!!!

[goldies67]

pm sent! thanks!

[70 f-100 ranger xlt]

Hows the fenders and inner fenders? core support? how much? And what would the shipping be sent to 49442? Thanks!

[91Bear]

How much for the door latch assemblies?

[flyboy2610]

I could use the sliding seat tracks plus the connecting wire from the bottom of the seat. They just unbolt from the seat frame.

[kuz367]

Well, the fenders and core support are not really usefull. Like many of these trucks they are very rusty. I do appreciate the interest. Kevin

Hows the fenders and inner fenders? core support? how much? And what would the shipping be sent to 49442? Thanks!

[kuz367]

Flyboy,

Thanks for the response. I would like $20 for the seat tracks. I believe I could curl the wire up and put it in the same box as the tracks. I believe I could get them in a large flat rate box for 14.95. If I can't fit them in there that would, of course change the shipping price, which I would tell you beforehand. So $34.95 total. Just let me know. Thanks. Kevin

I could use the sliding seat tracks plus the connecting wire from the bottom of the seat. They just unbolt from the seat frame.

[fordman]

i've tried the seat tracks wont fit in a flat rate box. damn it.

[kuz367]

Double damn it! Thanks for the info fordman

i've tried the seat tracks wont fit in a flat rate box. damn it.

[newb70f250camper]

I need the horn ring and all that goes with it spring brush etc. how much to 80528?

[kuz367]

As it turns out. The horn ring and accompanying parts are gone

[FordTruck]

how much for the 3spd links? you don't happen to have a good 3spd column?

[70_F100]

you don't happen to have a good 3spd column?

If he doesn't have one, this might be a possibility: http://www.fordification.com/forum/view ... =2&t=61911

[FordTruck]

you don't happen to have a good 3spd column?

If he doesn't have one, this might be a possibility: http://www.fordification.com/forum/view ... =2&t=61911

I've already gone junkyard hunting with no luck.

[70_F100]

you don't happen to have a good 3spd column?

If he doesn't have one, this might be a possibility: http://www.fordification.com/forum/view ... =2&t=61911

I've already gone junkyard hunting with no luck.

I wasn't talking about going junkyard hunting. I was suggesting that Flyboy might grab that one for you...