1967 F-100 project

Post progress reports on your project truck(s)

Moderator: FORDification

Post Reply
Tregs
New Member
New Member
Posts: 9
Joined: Sat May 28, 2011 9:49 pm

Re: 1967 F-100 project

Post by Tregs »

That's an Awsome job you have done I will be keeping a close eye on this one. good luck with the rest of the build
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

Well, finally able to get some time for truck work. I finished up the dolly I'm going to use to work on the cab. I'll bring it home this weekend, hopefully, to replace the front mounts and cab corners. I'm thinking about pulling the cowl also.
You do not have the required permissions to view the files attached to this post.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
goldies67
Preferred User
Preferred User
Posts: 283
Joined: Mon Jun 27, 2011 4:06 pm
Location: north attleboro mass

Re: 1967 F-100 project

Post by goldies67 »

nice work! im looking forward to more updates and pics!
:thup:
1967 f100 styleside
User avatar
JWW
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 793
Joined: Wed Apr 11, 2007 7:57 pm
Location: Tennessee

Re: 1967 F-100 project

Post by JWW »

Great progress!

Did you put any rubber spacers in between your leaf springs when you put them back together? I'm debating on doing that.
JWW
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
FormerMarine1981
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 793
Joined: Sun Jan 21, 2007 10:28 pm
Location: Texas , Austin
Contact:

Re: 1967 F-100 project

Post by FormerMarine1981 »

Glad to see you back at it. I think it would be cool to put a dent dash into a bump.
What we do in Life, Echoes in Eternity
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

I think it should work. I did finally get the 89 F-250 that the 351W and ZF-5 5 speed and TC are coming out of this weekend. It was a steal at $550.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

JWW wrote:Great progress!

Did you put any rubber spacers in between your leaf springs when you put them back together? I'm debating on doing that.
Yep, got some from the local suspension shop, along with the new clamps.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
JWW
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 793
Joined: Wed Apr 11, 2007 7:57 pm
Location: Tennessee

Re: 1967 F-100 project

Post by JWW »

Would you care to take a picture of where you placed the spacers? Thanks
JWW
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

I'll do it next time I'm at my brother's place, that's where the frame is at right now. I'll double check my pics, though, and see if maybe I have a close up of the springs.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
Joshpow
100% FORDified!
100% FORDified!
Posts: 1790
Joined: Fri Jan 21, 2005 10:43 am
Location: Virginia
Contact:

Re: 1967 F-100 project

Post by Joshpow »

Looking good.
Josh

72 F-100 Ranger XLT SWB
71 F-100 Custom SWB
67 F-350 Dually Dump
02 F-250 Stroke
http://www.cardomain.com/ride/2972100
User avatar
JWW
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 793
Joined: Wed Apr 11, 2007 7:57 pm
Location: Tennessee

Re: 1967 F-100 project

Post by JWW »

67nukeford wrote:I'll do it next time I'm at my brother's place, that's where the frame is at right now. I'll double check my pics, though, and see if maybe I have a close up of the springs.
If it is no trouble. I appreciate it.
JWW
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

Here are a few pics of the 89 I'm getting the engine/tranny out of. Not sure if I'm going to use that factory EFI, or go to an aftermarket, Depends on how much of a pain it would be to use it, so I'm saving everything off of it for now. The only thing missing off of the motor is the alternator and it's brackets. I'll have to get another one, I want to use that serpentine belt drive.
You do not have the required permissions to view the files attached to this post.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

Here is the cab, ready for it's trip to the house. Hopefully get it home Sunday.
You do not have the required permissions to view the files attached to this post.
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
User avatar
67mann
100% FORDified!
100% FORDified!
Posts: 1705
Joined: Thu Feb 07, 2008 7:19 am
Location: NY..Mt.Morris 3rdgen. homestead

Re: 1967 F-100 project

Post by 67mann »

67nukeford wrote:Here are a few pics of the 89 I'm getting the engine/tranny out of. Not sure if I'm going to use that factory EFI, or go to an aftermarket, Depends on how much of a pain it would be to use it, so I'm saving everything off of it for now. The only thing missing off of the motor is the alternator and it's brackets. I'll have to get another one, I want to use that serpentine belt drive.
I've got an 86 EFI(351W)laying around...maybe it would have been better to use that :hmm: than rebuilding 390 :nono: got have the FE :P but I do wonder if I can make use of anything of it :?

Your comin along looks good :thup:
I've had enough and I'm not alone
http://s267.photobucket.com/albums/ii304/67mann/
User avatar
67nukeford
Blue Oval Fan
Blue Oval Fan
Posts: 589
Joined: Tue Aug 19, 2008 3:20 pm
Location: Nebraska, Omaha/Elkhorn

Re: 1967 F-100 project

Post by 67nukeford »

I was going to put a 390 in this truck, but since I plan on driving this a lot, I decided to go this route. I have a Super Duty for pulling stuff, and I'm not making a race truck, so the 390 will go in another toy, maybe a Fairlane!
Pat 1967 F100 4WD
LINK TO PROJECT THREAD
:http://www.fordification.com/forum/view ... &sk=t&sd=a
Post Reply