emblem

georgeiiv · Post by **georgeiiv** » Mon Oct 17, 2005 9:45 pm

I am getting ready to paint my 69 Ranger, is there an easier way for me to take the emblems off without creating too much scratches? I tried every way but they are on pretty good.

heep70 · Post by **heep70** » Mon Oct 17, 2005 10:34 pm

Which emblems? Arn't they secured with a nut on the back side?

georgeiiv · Post by **georgeiiv** » Mon Oct 17, 2005 10:46 pm

emblems on the both fender "camper special 390". they are bolted on from the back?

heep70 · Post by **heep70** » Mon Oct 17, 2005 10:51 pm

Yep Check it out and get back with me. I am confused now.

Post by **FORDification** » Mon Oct 17, 2005 10:54 pm

No, those emblems are just pressed into inserts in the fender. They'll have to be pried out. You can use a thin piece of wood for your screwdriver to pry against to keep from scratching the paint. Don't twist the screwdriver....that WILL cause scratches. Just gently pry, alternating sides and angle, and slowly work it out.

mk · Post by mk » Wed Oct 19, 2005 12:03 am

Check with your local glass shop. They use a flat white plastic stick for prying the rubber around the glass. I've got a couple and they work great on emblems.

mike

fordman · Post by **fordman** » Wed Oct 19, 2005 12:07 am

do those emblems have those funny barrel shaped clips on the emblem pins that can be removed to ease the removal of the emblem? like the ones on the FORD hood letters.

The FORDification.com Forums

emblem

emblem

re: emblem

re: emblem

re: emblem

re: emblem