Never had a problem with it. I did buy seals and gaskets and I am not planning on a rebuild, but it is out of the truck and cleaned up. Is there any reason to rebuild of should I just replace gaskets and seals and slap it in?
Thank you for the input.
Should I rebuild my NP-435 Transmission?
Moderators: FORDification, 70_F100
-
bjde0b
- Preferred User
- Posts: 402
- Joined: Mon Dec 08, 2008 9:54 pm
- Location: Youngsville, LA
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: Should I rebuild my NP-435 Transmission?
check your shaft play and see if the bearing seem worn. if they are tight i wouldn't worry about it. if they are real loose you would want to do something to it.
-
bjde0b
- Preferred User
- Posts: 402
- Joined: Mon Dec 08, 2008 9:54 pm
- Location: Youngsville, LA
Re: Should I rebuild my NP-435 Transmission?
axial or radial? Would you recommend cleaning out the casing even if I don't do a rebuild?
Check out my build. http://s1088.photobucket.com/albums/i336/MyF100/
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: Should I rebuild my NP-435 Transmission?
eitrher way. and you could drain the fluid and dump some gas or something through it to clean it i guess.