Alrighty....a fine fellow from another ford forum....(5x fast) posted these up for me, as I am planning out this swap into a 4x....these are in an F-350 2x.....
http://www.ford-trucks.com/forums/83418 ... ost7301574
OK, so I can't post the pics, but if you click on the link, and scroll down down down, you'll see how tight of a fit it is....I found it most useful...
If posting that link to another site is a no-no, then my bad.
67-68 F100 2wd 460 engine swap advise please !!
Moderators: Ranchero50, DuckRyder
-
waynaferd
- New Member
- Posts: 122
- Joined: Fri Sep 22, 2006 8:43 pm
- Location: Stinkin Lincoln Maine!
Re: 67-68 F100 2wd 460 engine swap advise please !!
A 72 F-250 Hi-Boy "project" ( that means sitting untouched for 3 or so years)
And a little 94 F-150 Flareside, 7" higher and 35's...
And a little 94 F-150 Flareside, 7" higher and 35's...
-
Salt-shaker
- New Member
- Posts: 23
- Joined: Mon Mar 23, 2009 1:11 pm
Re: 67-68 F100 2wd 460 engine swap advise please !!
Quick before everyone jumps on me.. I wanted to state dent side trucks ( not bumpside ) trucks or trucks of mid 1970's vintage, I should also add that if you have a Bendix power steering box that cast iron exhaust manifolds from the mid 1980 trucks work nicely. I'm not sure what slang to call them but I believe my previous mistake was caused by being in a hurry to leave home for work . ( What a poor excuse )..Have Fun..