spark plug wire sequence

[emilo2008]

i need a diagram for a 352.360.390 if you guys have one.thanks

[fordman]

it should be on the manifold but here is one i got off of here awhile back.

[thebannister8]

double check on your manifold though...

[emilo2008]

it wants to start up but my solenoid keeps getting hot and the wires.does anyone have a diagram too.

[fordman]

that wasnt a very good diagram. sorry about that try this one.

[sacramento_ford]

that wasnt a very good diagram. sorry about that try this one.

thanks fordman. i dont need to post for that, i took my wires off to take em back and thought i could figure it out, thing was poofing fuel out and not staring. ,,,

[fordman]

that is back firing through the carb and that means the dist is too far one way or another. or the timing chain is gone out or jumped.

[willowbilly3]

or the plug wires are off.
Excessive heat on the solenoid/wires means too much resistance, probably a poor connection or maybe you just cranked too long. I think the proper amount of cranking goes something like, crank 20 seconds, wait 2 minutes. Of course non of us follow that when we are having issues.

[emilo2008]

dang i have the firing order right.any more suggestions it turns on for about 3 seconds then dies. the car throttle is hard im going to take it off and go from there.im getting fuel does anyone have a diagram on the vacum lines?