Tranny mod question...

[rcsn2001]

Hey all,
I just got a '67 F100 with a 352 FE motor in it. This is gonna be my first Ford to rebuild, but i've done a few GM's. Anyway, the guy who had it before me converted it from 3 on the tree to a floor shift setup. Unfortunately, the tranny is leaking up around the linkages. First question, does anyone know a good place to pick up a rebuild kit for these trannys?
Second question, a buddy of mine rebuilds cars for a living, and when me and him were talking about transmission options, he suggested a find a T5 tranny, so I can have a five speed, and get more than 8mpg on the highway. I was wondering if anyone knew of any platforms where a T5 was mated to an FE block, such as a newer truck, so that it will be easier to switch out with my tranny. Also, I was wondering if anyone had done this and could tell me how everything worked out for ya.

Also, if anyone has other suggestions for a tranny swap i am all ears, but this truck is gonna be a daily driver for me, and spend a good amount of time on the highway. Also, the rear end has 3.73's, but i am not sure i'f i'm gonna keep it at that.

Thanks in advance

[fordman]

i think but im not sure but the newer transmissions could bolt right up to your old bellhousing.

[rcsn2001]

gotcha. like i said, i don't know fords well, but i got this truck for a great price, and she drives amazing, so i am really wantin to set her up nice. Any input from guys with experience is greatly appreciated.

[mrtleavitt]

You should prob change the rear end gears to 3.50 or maybe even 3.25. That will help gas mileage a bit and is very inexpensive if you got a nearby junk yard. You can usually get a 3rd member for less than $50. That's my first suggestion.

Are you wanting to go with an automatic or manual tranny?