carb spacer i.d.

ezernut9mm · Post by **ezernut9mm** » Sat Jan 17, 2009 9:03 pm

did ford ever use a factory 2bbl phenolic spacer? the reason i ask it that i got one off the 67 i parted. there are no markings at all on it. the engine looked to be very original, but i have not seen one of these for a 2bbl even in catalogs and i have been looking for a long time for one to replace the aluminium one that i currently have.
so, any of you 67 fe owners have a phenolic carb spacer or just the aluminium type?

bumpside · Post by **bumpside** » Sat Jan 17, 2009 9:24 pm

I don't know about the 67 for shure, but my 72 had one. The pcv valve hose connected to the back of it.

ezernut9mm · Post by **ezernut9mm** » Sat Jan 17, 2009 9:33 pm

yes the pvc goes to the back, but it was phenolic and not aluminium?

bumpside · Post by **bumpside** » Sat Jan 17, 2009 9:45 pm

Mine was phenolic also.

ezernut9mm · Post by **ezernut9mm** » Sat Jan 17, 2009 10:02 pm

cool. thanks for the info. the funny thing is that i have been looking for one of these forever. i even posted a want ad here quite a while back looking for one. now i should be good to go.

bumpside · Post by **bumpside** » Sat Jan 17, 2009 10:31 pm

willowbilly3 · Post by **willowbilly3** » Sun Jan 18, 2009 5:03 pm

I looked high and low for one when my 390 was perking the fuel. I found a high dollar on in a racing catalog but that was all.

ezernut9mm · Post by **ezernut9mm** » Sun Jan 18, 2009 6:57 pm

i did find one on holley's website the other day for a 2100, but it does not have the provision for an egr.

The FORDification.com Forums

carb spacer i.d.

carb spacer i.d.

Re: carb spacer i.d.

Re: carb spacer i.d.

Re: carb spacer i.d.

Re: carb spacer i.d.

Re: carb spacer i.d.

Re: carb spacer i.d.

Re: carb spacer i.d.