Exhaust manifold bolts

Faltura · Post by **Faltura** » Tue Dec 30, 2008 4:06 pm

The two bolts on the top passenger side exhaust manifold that hold the heat riser for the air intake are different from the others. Does anyone know where you can find replacements? It is threaded on both ends and has a nut about 1/4 of the length from the outside end.

Dragon · Post by **Dragon** » Tue Dec 30, 2008 6:36 pm

Faltura wrote:The two bolts on the top passenger side exhaust manifold that hold the heat riser for the air intake are different from the others. Does anyone know where you can find replacements? It is threaded on both ends and has a nut about 1/4 of the length from the outside end.

That was for the warm air induction box.

If you don't have it don't worry about them unless you are going for Concours stock look.

fordman · Post by **fordman** » Tue Dec 30, 2008 7:14 pm

if you are wanting those exact bolts. what they are. they are studs with nuts on them. any parts store will have studs and nuts.

Dragon · Post by **Dragon** » Tue Dec 30, 2008 7:37 pm

Don't use Home Depot grade bolts. There are much better lower rusting grades available.

The FORDification.com Forums

Exhaust manifold bolts

Exhaust manifold bolts

Re: Exhaust manifold bolts

Re: Exhaust manifold bolts

Re: Exhaust manifold bolts