Electric Choke hot wire???

[coletrain777]

Where power source do you guys use to run to the positive side of an electric choke on a Holley (I know brand won't matter). Just wondering where you run your hot line from? Thanks

[fordman]

to the stator wire of the alternator. that way it comes on when its suppose to and does run all the time with direct power to it.

[coletrain777]

forgive my ignorance, but which wire is that?

[fordman]

ithink it is the open one with no wire on it. it should say "s" below the stud.

[rubiranch]

ithink it is the open one with no wire on it. it should say "s" below the stud.

And it's usually has a black insulator around it.

[SteveC]

mine had a special looking black insulater that made it impossible to wire backwards

[3rdowner]

I wired mine to the fuse block. just make sure its on the correct side so the fuse will blow if there is a shortin the future.
Put it on something like wipers.

[Dragon]

I wired mine to the back of the ignition switch on position. Not accessory.