rear axle shaft swap
Moderator: FORDification
-
tybob81
- Blue Oval Fanatic
- Posts: 840
- Joined: Thu Mar 23, 2006 2:53 am
- Location: Murphysboro IL
- Contact:
rear axle shaft swap
I lost the paper I had written down what axle shafts from what 28 spline cars will work in our trucks to change the bolt pattern.
1968 swb hydroboost, ididit tilt column, Saginaw p/s pump with F series serpentine, all led lights, Vintage Air and painless wiring. 393w, tko600. CV front suspension w/c5 calipers and gt500 rotors. Stock Flexomatic leaf springs with 01 CV 8.8, 3.90 gears and Auburn locker. Custom wood bed floor. Full frame off resto-mod.
-
FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
Re: rear axle shaft swap
From what I've been told, "...you need 2 driver's side axles and drums from a 1977-79 T-bird, 73-79 Cougar or Montego, 72-79 Torino, Ranchero, or LTD II. They are the right length and have 28 splines."
I haven't personally tried this, so I can't verify it's accuracy. But if you try this, please follow up to this thread with an update.
I haven't personally tried this, so I can't verify it's accuracy. But if you try this, please follow up to this thread with an update.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!