460 question

OldRedFord · Post by **OldRedFord** » Thu Oct 30, 2008 9:49 pm

Would it be wise to go to stud mounted rockers on a iron head?

The cam I am running is 530 lift, and springs are 300# open pressure

I had asked on the 460 website but never really got a answer.

Post by **FORDification** » Thu Oct 30, 2008 10:21 pm

I must not be understanding what you're asking, 'cause 460 rockers are already stud-mounted.

OldRedFord · Post by **OldRedFord** » Thu Oct 30, 2008 11:32 pm

D3VE heads have bolt on rockers. Which is what I have.
Now D0VE heads have the studs from the factory.

willowbilly3 · Post by **willowbilly3** » Fri Oct 31, 2008 8:23 am

Stud mount with rollers and guide plates. I'm just guessing, never built one myself.

willowbilly3 · Post by **willowbilly3** » Sat Nov 01, 2008 8:02 am

I left a good set of C8 heads in Texas because I didn't want to pack them around, paid $50 for them at a swap meet.

The FORDification.com Forums

460 question

460 question

Re: 460 question

Re: 460 question

Re: 460 question

Re: 460 question