U Joints

390F100 · Post by **390F100** » Tue Oct 14, 2008 2:21 am

Where can I buy the rear ujoint which fits the 9" and is off set. I cant find it anywhere. I have a 2 piece shaft...

fmartin_gila1 · Post by **fmartin_gila1** » Tue Oct 14, 2008 7:03 am

Any parts house should have the 'U' joint.

Fred

390F100 · Post by **390F100** » Tue Oct 14, 2008 2:02 pm

They do but on my 68 I have a 2 piece drive shaft and a total of 3 u-joints. The front two are exactly the same and are readily available at all parts houses, my problem is that the rear u-joint is not the same as the front two, it is different and the parts houses do not show that, they only have one type listed. I am completely lost and baffled...Any advise or knowledge of what i'm talking about...

390F100

peanutman · Post by **peanutman** » Tue Oct 14, 2008 4:47 pm

Just put u-joints in my70 and all three were the same. Not sure why yours would be different.

70shortwide · Post by **70shortwide** » Tue Oct 14, 2008 5:13 pm

maybe a car 3rd member, i could easily be wrong but i think they might have a different pinion in them.

citizendick · Post by **citizendick** » Tue Oct 14, 2008 9:44 pm

390 if you take the joint to a parts house they should be able measure it and match it up to something in their catalog, best to go when their not busy. dick

averagef250 · Post by **averagef250** » Wed Oct 15, 2008 12:49 pm

Measure the caps and the cross width. These are "adapter joints". Odds are you're looking at a 1310/1330 cross.

The FORDification.com Forums

U Joints

U Joints

Re: U Joints

Re: U Joints

Re: U Joints

Re: U Joints

Re: U Joints

Re: U Joints