Transmission won't shift

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
USMC DI
New Member
New Member
Posts: 1
Joined: Sat Sep 13, 2008 12:41 pm

Transmission won't shift

Post by USMC DI »

Ok, it's my first post - and transmissions are really not my thing, so please bear with me. I have searched the forums - but I think I am using the wrong search terms. I am hoping somebody canhelp me.

I have a 1967 F100. Based off the CIN plate on the door I have a transmission code of G which is a Cruise-o-matic.

Here is my problem. When I put the truck in 'D', it starts in 1st gear and will not shift into 2nd or 3rd. If I put it in '2' and drive and then while driving put it into 'D', it will stay in 2nd, but won't shift into 3rd.

The problem started overnight. It was fine on the way out one morning. Problem showed up when I got into the truck to go home later that day.

Fluid level is fine.

Any thoughts? I am hoping it is a relatively inexpensive and quick repair.

Thank you.
User avatar
SteveC
Blue Oval Guru
Blue Oval Guru
Posts: 1091
Joined: Mon Oct 29, 2007 11:04 pm
Location: Nebraska, North Platte
Contact:

re: Transmission won't shift

Post by SteveC »

i have the same transmission in my 67 i really dont like it mine shifts hard and if you stomp on the gas it doesnt like to shift.. im replacing it in a few months with a 4spd.
I don't really care about brands Chevy Ford Dodge ...as long as it doesn't sound like two old dudes farting in a coffee can.
http://s169.photobucket.com/albums/u223/imabaka70/ Projects listed on the left side

WOOOT!! i passed my mechanics classes. Now working as a mechanic and waiting to go for my ASE certifications.

1967 f-100 4x4
1969/72 f100 351w EFI m5r2 5 speed
1988 ford f150 xlt lariat
1961 VW Beetle (wifes car)
User avatar
j41385
Preferred User
Preferred User
Posts: 288
Joined: Sun Jan 23, 2005 7:07 am
Location: Albany, Oregon Territory

re: Transmission won't shift

Post by j41385 »

Check the Vacuum Modulator. Sounds like the vacuum line popped off.
1968 F100 Took the running 390 out, and installed a Built 300 with AOD.
Engine Video... http://youtube.com/watch?v=2xgYd2u79NU


Image

Image Image
Jake11
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 826
Joined: Mon Nov 21, 2005 1:31 am

re: Transmission won't shift

Post by Jake11 »

Put in reverse and get it rolling backwards. Slam it into "D" and nail it.
Might take a couple tries. (knocks the stuck govenor loose).

Jake
Post Reply