wheel spacers

michael69 · Post by **michael69** » Sun Aug 03, 2008 11:52 am

Has anyone used 2'' wheel spacers on the rear of your truck to make rear look the same width as the front. And do they work ?

Georgia71 · Post by **Georgia71** » Sun Aug 03, 2008 8:17 pm

Michael I've been thinking the same thing! But not tried it.

Larry

SteveC · Post by **SteveC** » Mon Aug 04, 2008 12:37 am

sorry to high jack your thread

i know dad was looking for soom for his studebaker so he could put regualer steel wheels on the back end. the frame is wider than a stock scouts and the inside wheels on the rear rub.

Where would i even start looking for some i believe they are 5 x 5

michael69 · Post by **michael69** » Mon Aug 04, 2008 9:49 am

I found them on ebay. They have any bolt pattern you want. Just go to ebay and search wheel spacers.

FoMoCo · Post by **FoMoCo** » Fri Aug 08, 2008 7:12 am

Dont go with 2 inches. I know when you measure it comes out to 2 but I've tryed it and it looks really funny. I currently have 1.75 spacers an it looks proportional to the front. I have hauled heavy loads, and logged alot of highway miles with them with out any problems. I bought the one's from an ebay store claiming that they were made in America. Be sure to put blue locktight on the old studs.

Nick

michael69 · Post by **michael69** » Fri Aug 08, 2008 8:54 am

Thanks Nick that is what I needed to know. I thought about going with wider off set rims but really wanted to stay with same width front and back. I will try 1.75 in. spacers. What width rims and tire size do you run? THANKS AGAIN NICK

The FORDification.com Forums

wheel spacers

wheel spacers

re: wheel spacers

re: wheel spacers

re: wheel spacers

re: wheel spacers