aux. tank fill hose

[convincor]

Need a new fill hose for the aux tank on the 72.
Looking thru LMC, NPD, and Dennis Carpenter all they list one for is 71-72 f100. Why wouldn't it be the same for a f250??

[SteveC]

i got mine from there it fit my 67 f250 under the bed tank. it was a little loose but snugged up pretty good with a couple of clamps and doesnt leak.

probally there books dont list the tank as factory till those years and the tank was add on from a dealer for the rest of the years... then again thats speculation

[napa02]

LMC part # 43-3346 fit perfectly on my 71 f250 CS

[Faltura]

Would that hose fit a 69 F-250 CS?

[SteveC]

i believe that the same hose should work. At least it did on my 67 f250. Though i dont know what year the extra tank i have came from

[FORDification]

Those hoses will be different for '67-'69 trucks than they are for '70-'72 trucks. The early ('67-'69) version had the filler located above the bump, whereas the later {'70-'72) trucks had the filler below the bump. You could cut down an early hose to use in a later truck, but the later hose will be too short to use on the early trucks.

[SteveC]

wierd mine worked just fine... but my filler neck isnt in a stock location