everytime i take off from a dead stop, whether its just barely on the gas or standin on it, i get a nasty vibration that comes up through the gas pedal and i feel it in my feet. it also shakes the steering column. i already replaced the carrier bearing and u-joints, and it didnt get any better. any ideas on whats causing it??
its a 72 f250 w/ 460, C6 trans, and a dana 60 rear
vibration in the gas pedal
Moderators: FORDification, 70_F100
-
- New Member
- Posts: 5
- Joined: Sun Oct 21, 2007 4:56 pm
- Location: El Cajon
- Contact:
- willowbilly3
- 100% FORDified!
- Posts: 1591
- Joined: Mon Jul 19, 2004 7:38 pm
- Location: Black Hills
re: vibration in the gas pedal
Or your cab mounts are rusted out letting the cab rest on the frame.
Great ideas have always encounter violent opposition from mediocre minds.
-
- New Member
- Posts: 5
- Joined: Sun Oct 21, 2007 4:56 pm
- Location: El Cajon
- Contact:
re: vibration in the gas pedal
the motor mounts are new, i replaced those with the motor. ill do the tranny mount as soon as i can
i never would have thought to check the cab mounts, but i sure will. it prolly couldnt hurt to replace all the body mounts anyways
i never would have thought to check the cab mounts, but i sure will. it prolly couldnt hurt to replace all the body mounts anyways
"Ashes to ashes, dust to dust. If it wasnt for Chevy, our tools would rust"
1972 F250 Ranger
Camper Special 2wd
Rebuilt 460 BBF
C6
Dana 60 w/ 4.10's
1972 F250 Ranger
Camper Special 2wd
Rebuilt 460 BBF
C6
Dana 60 w/ 4.10's