Driveshaft questions
Moderators: FORDification, 70_F100
-
customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
re: Driveshaft questions
my drivshaft is 74 inches long and its a crewcab. i just ordered it and you measure from the end of the output shaft to the flat part on the yoke with the u jount out and the caps off.
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
-
customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
re: Driveshaft questions
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
