Hello, have a question. am currently rebuilding a C-6 and am looking for a local vendor to get some parts that need replacement. Does anyone have any suggestions? or just go the mail order route. Anyway, thanks for your time.
AL
C-6 QUESTION
Moderators: FORDification, 70_F100
-
Alex
- New Member
- Posts: 2
- Joined: Fri Apr 18, 2008 11:09 am
- Location: University Place, wa
C-6 QUESTION
1967 FORD F-250
-
convincor
- 100% FORDified!
- Posts: 1511
- Joined: Wed Sep 12, 2007 5:05 am
- Location: Connecticut
re: C-6 QUESTION
Napa sells a kit.
http://www.napaonline.com/MasterPages/N ... tch+Plates
http://www.napaonline.com/MasterPages/N ... tch+Plates
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
-
BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
I get my parts form the local Transtar.
Click on the "Locations" tab to see if there is one near you. I believe the have mail order, too.
http://www.transtarindustries.com/
Click on the "Locations" tab to see if there is one near you. I believe the have mail order, too.
http://www.transtarindustries.com/
-
carnuck
- New Member
- Posts: 187
- Joined: Sun Aug 26, 2007 10:43 pm
- Location: Lynnwood, WA
re: C-6 QUESTION
I have a 2wd C6 off a 400 motor for $50 just north of Seattle. (I get my stuff from Sea-Tac transmission by the old Midway drive-in 1/2 way between here and you)