460 w/ c6 swap '72 F100 yoke choice

[sunkistmaniac]

I have a 460 in my '72 F100 long box. I am ready to lift in one of the many c6's I have now. I have the carrier bearing (two drive shafts that meet) and I am missing a transmission yoke from the old set-up. Will this tranny bolt right up with just any c6 yoke? Is there any modifications to the existing drive shaft length wise?

[fordman]

the c6 and np435 front drive shafts are the same lengths in a longbed. the longer driveshafts for the front half would be a three speed shaft. i dont know about other transmissions and the driveshaft lengths. which other yokes from which transmissions do you have?

[sunkistmaniac]

I bought 3 transmissions (C6) and each of them do not have a yoke. I am in need of the right one for my application. inexpensive as possible. of course...thank you fordman!

[fordman]

let me see if i can get you one tomorrow. its suppose to rain all day so i will have the day off hopefully.