well this work???

[worldsmysterie]

i have a 67 F100 with a 240

i know you guys know your stuff so here is goes. Well this two match up?

you might have to copy and past but it would really be helpful if some of you would check it out for me, thanks allot

http://www.jegs.com/i/TCI/890/511200/10 ... 6476|10559

http://www.jegs.com/i/B&M/130/80680/10002/-1

[fordman]

that comes without the bellhousing it looks like. you will need the bellhousing to put that in. if your planning on racing that 240 then that rans says it will hold up. but i bet your not goign to be racing it. so i dont think you need that. i wouldnt do it.

[worldsmysterie]

im also going to put a 302 in it in a couple of mounths so will that trans work with the 302 also.?

[fordman]

yes it all in the bellhousing size. or i should say the bolt pattern.

[worldsmysterie]

thanks you!!!

[MadMaxetc]

Don't forget that the 300/240 has a slightly larger flywheel/flexplate and zero balance compaired to the 289/302. You can't just put 302 parts on a 300.