King pin Dana 44

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
User avatar
Rockcrusher
New Member
New Member
Posts: 68
Joined: Sun Jul 25, 2004 12:00 pm
Location: Nevada, Carson City
Contact:
Contact Rockcrusher

King pin Dana 44

Post by Rockcrusher »

I need a source for king pin shims (or trunnions as Ford calls them) for the HP Dana 44 in my '69 F100. Anyone?
Rockcrusher
http://www.rockcrusher4x4.com
Ignorance is sticking your hand in the fire 'cause you don't know what it is ... Stupidity is doing it a second time.
Top
User avatar
averagef250
100% FORDified!
100% FORDified!
Posts: 4387
Joined: Fri Mar 17, 2006 12:58 am
Location: Oregon, Beavercreek

Post by averagef250 »

I cut my own from shim stock with a razor blade. Call me crazy, but isn't a 69 F-100 HP44 a balljoint axle?
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70
Top
User avatar
Rockcrusher
New Member
New Member
Posts: 68
Joined: Sun Jul 25, 2004 12:00 pm
Location: Nevada, Carson City
Contact:
Contact Rockcrusher

re: King pin Dana 44

Post by Rockcrusher »

I think the switch to ball joints was mid 72ish.
Rockcrusher
http://www.rockcrusher4x4.com
Ignorance is sticking your hand in the fire 'cause you don't know what it is ... Stupidity is doing it a second time.
Top
Post Reply

Return to “Drivetrain”