89' 7.3 litre trans and t-case

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
mljjones67
Blue Oval Guru
Blue Oval Guru
Posts: 1341
Joined: Sun Aug 06, 2006 5:41 pm
Location: Utah, Springville
Contact:

89' 7.3 litre trans and t-case

Post by mljjones67 »

Can anyone identify what these are? z5 np205 and so forth???????????


http://www.ksl.com/index.php?nid=218&ad ... at=&lpid=2
User avatar
ToughOldFord
100% FORDified!
100% FORDified!
Posts: 1911
Joined: Mon Jul 25, 2005 10:47 pm
Location: Communist California, USA

re: 89' 7.3 litre trans and t-case

Post by ToughOldFord »

I think that's going to be a T-19 4 speed.
User avatar
ToughOldFord
100% FORDified!
100% FORDified!
Posts: 1911
Joined: Mon Jul 25, 2005 10:47 pm
Location: Communist California, USA

re: 89' 7.3 litre trans and t-case

Post by ToughOldFord »

I was curious about that T-Case so I pulled out my manuals. They say that the NP 205 and 203 were used up until '79. In 80-86 they used the NP 208 and the BW 1345. In '87 they went to the BW 13-56 Electronic Shift.

FWIW
User avatar
averagef250
100% FORDified!
100% FORDified!
Posts: 4387
Joined: Fri Mar 17, 2006 12:58 am
Location: Oregon, Beavercreek

Post by averagef250 »

From the pictures it's clearly a diesel ZF-5 and BW 1356 t-case. The drain plug straight up, it's a ZF. The drain and plugs in the t-case flush with the case it's a 1356, not a 1345.
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70
mljjones67
Blue Oval Guru
Blue Oval Guru
Posts: 1341
Joined: Sun Aug 06, 2006 5:41 pm
Location: Utah, Springville
Contact:

Post by mljjones67 »

Dustin is this a good set up for the 6bt?
What would be a good offer to give him?
User avatar
averagef250
100% FORDified!
100% FORDified!
Posts: 4387
Joined: Fri Mar 17, 2006 12:58 am
Location: Oregon, Beavercreek

Post by averagef250 »

If you can't drive it and it's over 100K consider it a core. I'd offer $200 and be willing to spend up to $500 for it. They aren't worth any more than that.

That is the ideal transmission to run behind a 12 valve. You'll need the destroked adapter, 03-06 ford diesel starter and a 2nd gen dodge 5 speed flywheel/clutch.

That transfer case will work, but I would use an NP205.
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70
mljjones67
Blue Oval Guru
Blue Oval Guru
Posts: 1341
Joined: Sun Aug 06, 2006 5:41 pm
Location: Utah, Springville
Contact:

Post by mljjones67 »

Thanks Dustin
I sent him an offer we will see.
mljjones67
Blue Oval Guru
Blue Oval Guru
Posts: 1341
Joined: Sun Aug 06, 2006 5:41 pm
Location: Utah, Springville
Contact:

re: 89' 7.3 litre trans and t-case

Post by mljjones67 »

Here is another. This looks to be the one I need!
http://www.ksl.com/index.php?nid=218&ad ... t=&lpid=24
Post Reply