spline count on 72 f100 9" axles?

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
User avatar
kilog55
Preferred User
Preferred User
Posts: 399
Joined: Sun Feb 10, 2008 1:07 pm
Location: Lenoxville, Pennsyltucky

spline count on 72 f100 9" axles?

Post by kilog55 »

what do we have 28 or 32 i assume 28 count correct?
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
User avatar
averagef250
100% FORDified!
100% FORDified!
Posts: 4387
Joined: Fri Mar 17, 2006 12:58 am
Location: Oregon, Beavercreek

Post by averagef250 »

There are 28 and 31 spline axles. 99.9% are 28. The 31's were only used in the big bearing housings which are very uncommon under bumpsides.
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70
User avatar
kilog55
Preferred User
Preferred User
Posts: 399
Joined: Sun Feb 10, 2008 1:07 pm
Location: Lenoxville, Pennsyltucky

Post by kilog55 »

alrighty was just wondering incase i were to put a detroit locker in
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

re: spline count on 72 f100 9" axles?

Post by basketcase0302 »

kilog,

If you still have the tag on the axle this will help:
http://www.fordification.com/rearends-ford01.htm

If not, you might have to pull a wheel, drum and axle shaft to ID it.

Basketcase
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
kilog55
Preferred User
Preferred User
Posts: 399
Joined: Sun Feb 10, 2008 1:07 pm
Location: Lenoxville, Pennsyltucky

Post by kilog55 »

yeah its still on there believe it or not but its too cold to crawl on the ground right now. im really surprised at the condition of this truck i know it was inside for quite awhile
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
Post Reply