Has anyone filled any of the holes in there frame to clean it up? Im going to be doing that on my frame and thinking mig welder with some round steel dowel (weld one side, cut it off with a die grinder and then weld the other side) any thoughts?
Todd
filling holes in frame?
Moderator: FORDification
-
zakt
- Blue Oval Fanatic
- Posts: 807
- Joined: Thu Sep 02, 2004 9:16 pm
- Location: San Diego, California
-
flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
re: filling holes in frame?
Sounds like it should work.
Let us know how it worked out.
Let us know how it worked out.
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
-
FORDification
- Site & Forum Admin
- Posts: 8049
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: filling holes in frame?
If I were building a show truck, I'd do that too....but for anything other than a show truck, it seems to me like a lot of work for something that most people would never see.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!