Posi trac? Trac loc?
Moderators: FORDification, 70_F100
-
sideoilerfe
- Blue Oval Fanatic
- Posts: 804
- Joined: Tue Sep 11, 2007 10:04 pm
- Location: Oregon, Portland
re: Posi trac? Trac loc?
Thanks for the pic. All cleared up now. I have Powerlocs in both front and rear.
Side oiler FE, see if you can catch me!!!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
1970 F250 4x4 390/4spd
1968 F250 4X2 360/C6/No Rust!
-
averagef250
- 100% FORDified!
- Posts: 4387
- Joined: Fri Mar 17, 2006 12:58 am
- Location: Oregon, Beavercreek
I've seen trac-locs broken in half and the worst part was the owner didn't even know he had a posi!
Like Greg said, I'd weld an open carrier far before I'd swap in a trac-lok. I buy a few pounds of 9018 rod, preheat the carrier and axleshaft spiders and fill in the gaps. I don't even install the cross pin or center spiders.
In lincoln lockers I trust!
Like Greg said, I'd weld an open carrier far before I'd swap in a trac-lok. I buy a few pounds of 9018 rod, preheat the carrier and axleshaft spiders and fill in the gaps. I don't even install the cross pin or center spiders.
In lincoln lockers I trust!
1970 F-250 4x4 original Willock swivel frame chassis '93 5.9 Cummins/Getrag/NP205/HP60/D70