Need a brake differential valve

dsc · Post by **dsc** » Sun Jan 13, 2008 8:35 am

1968 F250 with drums front and rear. The differential valve is missing (truck has been sitting for a long time). I have been searching or a replacement, but to no avail.

Can anyone tell me where I can get a differential valve for this truck?

heep70 · Post by **heep70** » Sun Jan 13, 2008 11:52 am

Hang in there . Somebody here I am sure has an extra.

seattle67 · Post by **seattle67** » Sun Jan 13, 2008 12:17 pm

I edited my original response because I answered before I had my second cup of coffee and wasnt thinking clear.

You are right, I have never seen differential blocks in any of the parts catalogs, it may be a wrecking yard part.

It wouldn't surprise me if Fordman has a couple though.

AlleyCat · Post by **AlleyCat** » Sun Jan 13, 2008 1:20 pm

Yes they are a salvage yard item.If Fordman doesn't have any p/m me.

theskytoucher · Post by **theskytoucher** » Sun Jan 13, 2008 6:40 pm

i have one for a f-100, if they are the same im not sure!!!

fordman · Post by **fordman** » Sun Jan 13, 2008 9:13 pm

pm returned. thanks seattle67. i do have one.

dsc · Post by **dsc** » Sun Jan 13, 2008 9:33 pm

What a great website.

AlleyCat · Post by **AlleyCat** » Sun Jan 13, 2008 9:55 pm

dsc wrote:What a great website.

We try.

Nausea · Post by **Nausea** » Mon Jan 14, 2008 9:29 am

I have one also from a '70 F250. Little bitty guy that fits in the frame well behind the PS pump - if anybody needs it - along with the front drum hardware.

PetesPonies · Post by **PetesPonies** » Wed Jan 23, 2008 12:10 pm

are you talking aboyt the combination valve or distribution block? Because the differential valve is a valve that is inside the above mentioned device.

basketcase0302 · Post by **basketcase0302** » Wed Jan 23, 2008 5:01 pm

dsc,

Lotta' resources here for sure!

fits in the frame well behind the PS pump

They just had to put them is almost the worst possible place to access!

Saw a dent a few months ago with it mounted on top of the steering box via a bracket.

Can't remember how my 79' was...

Basketcase

AlleyCat · Post by **AlleyCat** » Wed Jan 23, 2008 5:30 pm

basketcase0302 wrote:dsc,

Lotta' resources here for sure!

fits in the frame well behind the PS pump
They just had to put them is almost the worst possible place to access!

Saw a dent a few months ago with it mounted on top of the steering box via a bracket.

Can't remember how my 79' was...

Basketcase

If it was a 2WD it would have been mounted to the rear of the engine crossmember on the left side.

fordman · Post by **fordman** » Wed Jan 23, 2008 5:36 pm

teh 78 propotional valve was also mounted on the rear of the crossmember

Post by **FORDification** » Thu Jan 24, 2008 9:43 pm

'73-'77 2WD proportioning valves were mounted on top of the steering box. '78-'79 2WDs had them mounted on the left/rear of the front crossmember.

MadMaxetc · Post by **MadMaxetc** » Fri Jan 25, 2008 1:44 pm

I have one of each kind if anyone still needs one.

Disk/Drum

&

Drum/Drum

The FORDification.com Forums

Need a brake differential valve

Need a brake differential valve

re: Need a brake differential valve

re: Need a brake differential valve

re: Need a brake differential valve

re: Need a brake differential valve

Re: re: Need a brake differential valve

re: Need a brake differential valve

re: Need a brake differential valve

Re: re: Need a brake differential valve

re: Need a brake differential valve