C-6 / Cruise-o-matic tranny Q's.
Moderators: FORDification, 70_F100
-
- New Member
- Posts: 44
- Joined: Wed Jun 13, 2007 12:09 am
- Location: Kansas
C-6 / Cruise-o-matic tranny Q's.
I got a couple of C-6's for a c-note & one of them I'm rather curious about. It has a removable aluminum bell-housing that looks like a FE style pattern & the body of it is cast iron. The other thing is the tail-shaft/U-joint at the back is wierd. Like truck C-6's have the bolt on yoke with a short tail-shaft & car's have a slip in joint & long tail-shaft. This one is short like a truck tranny & has a blot-on flange, then the yoke bolts to the flange like what you see on newer cars. How do I identify whether this is a C-6 or a cruise-o-matic over-drive tranny? Also, I heard a funny wive's tale when I was a kid. This old man told me that some auto's (including C-6's) could be push started because the pump was driven from the driveshaft. In thoery I guess this means that if the vehicle is moving making the driveshaft spin, making the pump turn & pressurizing the clutches allowing it to turn over the motor like a manual. Not sure if this is true, just curious if anyone out there knows whether it is or not. Thanks in advance for any help with either of these questions.
'06 ZX636R streetfighter-dyno'd 113 h.p. @ 16K & 59 ft. lbs. @ 10K <For sale!
'69 Ford F-250 <Had to sell with the '71 & '67...
'77 Kawasaki KZ650, 'Barby', being completely rebuilt in my basement apartment with dual sport tires & 750 motor!
'83 K5 Blazer, 'Piggy', daily cage / rust bucket / death trap / bank account liquidator. <For sale!
'69 Ford F-250 <Had to sell with the '71 & '67...
'77 Kawasaki KZ650, 'Barby', being completely rebuilt in my basement apartment with dual sport tires & 750 motor!
'83 K5 Blazer, 'Piggy', daily cage / rust bucket / death trap / bank account liquidator. <For sale!
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
c6 doesnt have a removable bellhousing. i think it was only c4 and fmx that had the removable bellhousings. as far as the push starting thing no. only if the trans was a older one from the 50's did that. the rear pump in these transmissions wont push enough to do what needs to be done to start the engine. and the driveshaft wont turn the front pump.
Last edited by fordman on Fri Nov 23, 2007 9:01 pm, edited 2 times in total.
- BobbyFord
- 100% FORDified!
- Posts: 5372
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
-
- New Member
- Posts: 44
- Joined: Wed Jun 13, 2007 12:09 am
- Location: Kansas
re: C-6 / Cruise-o-matic tranny Q's.
So the FMX & COM are the same thing? I thought the FMX was a smaller tranny & the COM was an over-drive version of the C-6. Anyways, since this tranny has a cast iron body, you're sure it's an OD? I want to make sure because I want to put an OD behind my next FE. Thanks for the info guys.
'06 ZX636R streetfighter-dyno'd 113 h.p. @ 16K & 59 ft. lbs. @ 10K <For sale!
'69 Ford F-250 <Had to sell with the '71 & '67...
'77 Kawasaki KZ650, 'Barby', being completely rebuilt in my basement apartment with dual sport tires & 750 motor!
'83 K5 Blazer, 'Piggy', daily cage / rust bucket / death trap / bank account liquidator. <For sale!
'69 Ford F-250 <Had to sell with the '71 & '67...
'77 Kawasaki KZ650, 'Barby', being completely rebuilt in my basement apartment with dual sport tires & 750 motor!
'83 K5 Blazer, 'Piggy', daily cage / rust bucket / death trap / bank account liquidator. <For sale!
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
re: C-6 / Cruise-o-matic tranny Q's.
I'm so....glad this got settled.I heard a funny wive's tale when I was a kid. This old man told me that some auto's (including C-6's) could be push started because the pump was driven from the driveshaft.
Cause I've always heard the same thing, (but never had the cahonies to ask).
Basketcase
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- DuckRyder
- Moderator
- Posts: 4924
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: C-6 / Cruise-o-matic tranny Q's.
An FMX is not an overdrive.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
- New Member
- Posts: 44
- Joined: Wed Jun 13, 2007 12:09 am
- Location: Kansas
re: C-6 / Cruise-o-matic tranny Q's.
So niether of these are OD's? I always heard as a kid that there was an OD version of the C-6. I was hoping one of these was exactly that.
'06 ZX636R streetfighter-dyno'd 113 h.p. @ 16K & 59 ft. lbs. @ 10K <For sale!
'69 Ford F-250 <Had to sell with the '71 & '67...
'77 Kawasaki KZ650, 'Barby', being completely rebuilt in my basement apartment with dual sport tires & 750 motor!
'83 K5 Blazer, 'Piggy', daily cage / rust bucket / death trap / bank account liquidator. <For sale!
'69 Ford F-250 <Had to sell with the '71 & '67...
'77 Kawasaki KZ650, 'Barby', being completely rebuilt in my basement apartment with dual sport tires & 750 motor!
'83 K5 Blazer, 'Piggy', daily cage / rust bucket / death trap / bank account liquidator. <For sale!
- DuckRyder
- Moderator
- Posts: 4924
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: C-6 / Cruise-o-matic tranny Q's.
An E40D is basically an overdrive C-6...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- AlleyCat
- Blue Oval Guru
- Posts: 1283
- Joined: Sat May 12, 2007 8:28 pm
- Location: Pennsylvania, Pittsburgh
re: C-6 / Cruise-o-matic tranny Q's.
You may also have an MX. The FMX didn't come out until 69.I don't know the differences between them but they do look similar and both have removable bells.
None of the Ford OD trannys will bolt to an FE but I do remember seeing reference to an adapter to bolt an E4OD to one.
None of the Ford OD trannys will bolt to an FE but I do remember seeing reference to an adapter to bolt an E4OD to one.
Clay
72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver
" Professional Wrecker Operators - We Pull for America "
72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver
" Professional Wrecker Operators - We Pull for America "