returning to STRAIGHT?

champdog · Post by **champdog** » Sun Nov 04, 2007 5:56 pm

I have a Bendix PS converson on my 68 f-100. Works well but for one thing. After you turn the the truck does not re center its self. I need to drive it back to center. Most vehicles return real close to center after you let go of the wheel. As any one heard of this before. Champdog

wt4speed#2 · Post by **wt4speed#2** » Sun Nov 04, 2007 6:00 pm

Hey champ,
Could be a number of things. If it was me I'd be sure the king pins are taking grease. jack it up and get the weight off the spindles , grease upper and lower both sides and turn it lock to lock and repeat. If this dosen't work you'll need to start looking elsewhere.