Rattle can "temporary" primering?
Moderator: FORDification
-
big_blue_72
- New Member
- Posts: 17
- Joined: Sun Apr 24, 2005 8:29 pm
- Location: California, Stockton
re: Rattle can "temporary" primering?
i would sand the surface with some 180 grit sand paper to take all the rust off then get sum stuff called (metal prep ) from ppg to clean the metal surface then there is a self etching primer from (SEM) spray a light coat over the bare metal then spray 3 medium coats of (SEM) rattle can primer yer done hope this helps. P.S. white vinager is a good rust killer wipe over the clean metal surface then primer
-
rjewkes
- 100% FORDified!
- Posts: 3711
- Joined: Sun Apr 17, 2005 1:09 am
- Location: Missouri, Webb City
- Contact:
re: Rattle can "temporary" primering?
HMMM. RAAAATTTTLE CAAAAAAAAAAAAAAAAN!
Rattle can andycapple Der..oops darn old dang dang... Dilexia candycrapple red over black then clear.
Rattle can andycapple Der..oops darn old dang dang... Dilexia candycrapple red over black then clear.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com