tranny id

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
User avatar
qmcdugan
New Member
New Member
Posts: 94
Joined: Wed Nov 15, 2006 10:07 pm
Location: Coos Bay, Oregon

tranny id

Post by qmcdugan »

What do I look for to id wheather I have the C4 or C6 attached to the 360 in my 68 F250?
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Post by fordman »

its probably a c6 hooked to that engine in that isze of truck the way to tell a c6 is the pan is almost suare but at one corner the pan has whats called a dog leg thing. it more of a bump out on the pan. the c4 is a totally square pan
User avatar
flyboy2610
100% FORDified!
100% FORDified!
Posts: 4901
Joined: Sun Oct 03, 2004 6:42 pm
Location: Nebraska, Lincoln

Post by flyboy2610 »

The C has a bellhousing cast into the tranny. The C4's had removable bellhousings. If yoy have an FE, you don't have a C4 unless a PO put it there.
"If the women don't find you handsome, they should at least find you handy."
Red Green

If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
User avatar
qmcdugan
New Member
New Member
Posts: 94
Joined: Wed Nov 15, 2006 10:07 pm
Location: Coos Bay, Oregon

re: tranny id

Post by qmcdugan »

Whoa that was quick, Thanks! Next thing I'd like to find out pertains to the water leak into the cab from rain running down into the cowl vents just below the windshield. I have the catalogs from MAC's and LMC. They have a cowl lacing kit. But would that take care of the leak assuming the metal is in good shape? Finally if that is the fix, where in the site would I get some info on what is involved in getting the lacing installed. Help... glub glub, from the Oregon coast.
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Post by fordman »

it just snaps ointo place i think is what eveyone has said. i havent done it. i dont know.
Post Reply