302/t-5 swap...

gt40racing · Post by **gt40racing** » Sun Aug 19, 2007 8:30 am

I am swapping a 302 with t-5 transmission into my 67 f100 stepside. Primary use for the truck will be just for fun. Does anyone have any info on the shift linkage setup for this conversion. Truck is currently a 6 cylinder 3 speed setup...

fmartin_gila1 · Post by **fmartin_gila1** » Mon Aug 20, 2007 3:38 am

There is no "shift linkage" on that, only the stick, and it will come up very close to the front of the seat. You may have to make a adapter between the lower and upper parts of the lever to allow it to go into 2, 4, & R positions.
Fred

MadMaxetc · Post by **MadMaxetc** » Mon Aug 20, 2007 8:58 pm

I put a T-5 behind my 300, but it will sit in the same spot with your 302

check out my Website for the pictures...>>HERE<<

spartman · Post by **spartman** » Tue Aug 21, 2007 2:27 pm

found a couple of sites that have some good info on the T-5 trannies.

http://www.flatheadv8.org/t5-swap.htm

http://www.flatheadv8.org/ernie/ernie-t5.htm

fmartin_gila1 · Post by **fmartin_gila1** » Wed Aug 22, 2007 4:34 am

MadMaxetc wrote:I put a T-5 behind my 300, but it will sit in the same spot with your 302

check out my Website for the pictures...[url=http://members.cox.net/madmaxetc/1967_F250/1967F250_P
ics_03.htm]>>HERE<<[/url]

We both accomplished the same thing by going at it in a different way. I made a little flat plate to bolt onto the lower lever about 3 inches long to move the upper lever forward.
Fred

The FORDification.com Forums

302/t-5 swap...

302/t-5 swap...

re: 302/t-5 swap...