instrument panel rewire

Electrical and Wiring Forum Archives
Post Reply
User avatar
prostreetjim
New Member
New Member
Posts: 44
Joined: Sun Jan 23, 2005 4:08 pm
Location: Ohio

instrument panel rewire

Post by prostreetjim »

I have a 70 harness and a 71 panel that I would like to use, my 70's circuts are shot in the one I have taken out, my question is can you wire in a 71 plug into my harness, My goal is to have a lighted dash just to see the speedo. If I can I'll just have to find one and I'll be on mt way to nite time cruzin
User avatar
bluef250
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 924
Joined: Fri Oct 29, 2004 8:49 pm
Location: Arizona

re: instrument panel rewire

Post by bluef250 »

Are the harness and the panel special (modified) or just what you have? Do you know what is wrong with the circuits?

Check this article

http://fordification.com/67-72ID.htm

The plugs are different between the panels. Therefore the configuration or layout of the circuits is different. Might be less of a headache to see if someone has an old '70 panel they want to sell or donate(?), then switch out what you need or want (like the speedo, gauges, etc.).
User avatar
FORDification
Site & Forum Admin
Site & Forum Admin
Posts: 8050
Joined: Sun Jul 11, 2004 12:52 am
Location: Kansas, Wellsville
Contact:

re: instrument panel rewire

Post by FORDification »

I agree....I'd think the $15-$20 you'd spend on a junkyard instrument panel for the '71-'72 trucks would be money better spent than trying to rewire your truck. I'll have to look in the shop, but I believe I even have one of those laying around.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
ImageImageImage
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
Post Reply