spindles
Moderator: FORDification
-
MadMaxetc
- Blue Oval Fanatic
- Posts: 850
- Joined: Wed Jan 03, 2007 10:48 pm
- Location: Kansas, Wichita
- Contact:
I am not aware of any such place.
I have a set of 79 Ibeams and spindles that you can have for $35.
They need new King pins.
I hope to make it to the KC swap meat in Aug. I could bring them up that far.
I have a set of 79 Ibeams and spindles that you can have for $35.
They need new King pins.
I hope to make it to the KC swap meat in Aug. I could bring them up that far.
Dan
Project: '63 F-100 LWB / 460 / C6 / 2x4 / Work In Progress!
Daily Driver: '67 F-250 Converted to F-100 LWB / 300 / T-5 / 9" 3.70:1 / 235/75R15 Tires
1/4 mile in 17.64s @ 75mph (it's 4200lbs!!!)
"Work Harder! Millions On Welfare Depend On YOU!!"
FORD Girl
Photobucket Pictures
Project: '63 F-100 LWB / 460 / C6 / 2x4 / Work In Progress!
Daily Driver: '67 F-250 Converted to F-100 LWB / 300 / T-5 / 9" 3.70:1 / 235/75R15 Tires
1/4 mile in 17.64s @ 75mph (it's 4200lbs!!!)
"Work Harder! Millions On Welfare Depend On YOU!!"
FORD Girl
Photobucket Pictures
-
FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: spindles
Or you could just hit one of the two U-Pull-Its in Omaha. Every time I'm there I see at least a half-dozen dentsides, and their prices are pretty reasonable.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
Jason
- New Member
- Posts: 34
- Joined: Sun Oct 15, 2006 1:39 pm
- Location: Carter Lake
- Contact:
re: spindles
I was hoping to find the disk spindles to fit my I-beams but its proving to be more difficult than its worth so I will just swap out the whole front end to get my disk fronts.
I will get my 460 Lincoln engine this weekend and need to get the brakes and front suspension done soon i hope to get the mechanical side done befor winter and finish the body in the spring.
I will get my 460 Lincoln engine this weekend and need to get the brakes and front suspension done soon i hope to get the mechanical side done befor winter and finish the body in the spring.
1967 F100 SWB step-side, 300" 6cyl, T-18 transmission and Dana 60-3 rear end with 3.54s