What are these parts for?

[spartman]

I was looking at Carolina Classics web site and saw these.

What are they for?

http://www.carolina-classics.com/Detail ... ategory=20

[averagef250]

I think those are listed wrong. Never seen those in any bumpside Z-bar I've worked on.

[Leadfoot]

I'll try to explain I got them for my truck.
they replace the plastic bushings on/for the ball stud on the engine block
and frame rail. they go in side the cutch leaver deal. ya know what the two clutch rod go to. its mounted at the back of the engine, about 2" in front of the firewall, and goes from the engine to the frame rail.

[spartman]

I see.

So they aren't for repairing an egged out z-bar then?

I sent an email to them asking about it and have yet to hear from them.

Thats why I posted here about them.

Looks like 1) I don't need them and 2) they don't need my business.

[390Nut]

Can't remember for sure, but I believe the z-bar I bought came from AutoKrafters (to replace the wallowed out one I had)

Replaced everything in the clutch linkage, from the pedal to the throw-out fork, about 4 years ago, and it all worked like a charm, until the little pivot bracket that holds the clutch fork in place inside the bellhousing shattered.