14 U- JOINTS
Moderators: FORDification, 70_F100
-
ptodave
- New Member
- Posts: 38
- Joined: Tue Feb 06, 2007 11:13 pm
- Location: California, Azusa
14 U- JOINTS
I have got 14 u-joints on my 72 4x4 bump. Anyone care to guess where they all go?
Engage Brain BEFORE Engaging Gears
72 F-250 390, NP435, Dana 24, D60, 14b, 4.88s, detroits, 2 winches, 4x4 40" tires.
72 F-250 390, NP435, Dana 24, D60, 14b, 4.88s, detroits, 2 winches, 4x4 40" tires.
-
72hiboy4x4
- Blue Oval Fanatic
- Posts: 978
- Joined: Sat Jan 01, 2005 8:53 pm
- Location: As far away as I can be from Wa state, without crossing the Mississippi
- Contact:
front axle (2)
front driveshaft (2)
middle driveshaft (2)
rear driveshaft (3)
PTO driveshafts (5)
did I win?
front driveshaft (2)
middle driveshaft (2)
rear driveshaft (3)
PTO driveshafts (5)
did I win?
In life many men take the path of righteousness, some take the path many others follow (G.M. owners, for example), some take a more arduous path, some a simpler path. I, sir, took the PSYCO-PATH!!
-
ptodave
- New Member
- Posts: 38
- Joined: Tue Feb 06, 2007 11:13 pm
- Location: California, Azusa
re: 14 U- JOINTS
Close but no cigar. Anyone else?
Anyone else?Engage Brain BEFORE Engaging Gears
72 F-250 390, NP435, Dana 24, D60, 14b, 4.88s, detroits, 2 winches, 4x4 40" tires.
72 F-250 390, NP435, Dana 24, D60, 14b, 4.88s, detroits, 2 winches, 4x4 40" tires.
-
crash_552
- New Member
- Posts: 94
- Joined: Thu Mar 15, 2007 2:24 am
- Location: Minnesota
re: 14 U- JOINTS
is it all factory?
Last edited by crash_552 on Mon Mar 19, 2007 4:46 pm, edited 1 time in total.
-
crash_552
- New Member
- Posts: 94
- Joined: Thu Mar 15, 2007 2:24 am
- Location: Minnesota
re: 14 U- JOINTS
tranny to transfer -4
transfer to rear -4
transfer to front -4
2 on front axle
transfer to rear -4
transfer to front -4
2 on front axle
-
71PA_Highboy
- Blue Oval Fanatic
- Posts: 923
- Joined: Tue May 23, 2006 11:32 am
- Location: Denver of the East
re: 14 U- JOINTS
front axle (2)
front driveshaft (3)
middle driveshaft (2)
rear driveshaft (3)
PTO driveshafts (2)
Steering column (2)
Unless you have a rear steer setup... How stock is this rig?
Eric
front driveshaft (3)
middle driveshaft (2)
rear driveshaft (3)
PTO driveshafts (2)
Steering column (2)
Unless you have a rear steer setup... How stock is this rig?
Eric
Got Ford?
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
2 EarlyBroncos (68,69)
2 Classic Mustangs (69,70)
1 F250 4x4 (71) - OB - 360, NP435, D24, HPD60 4.10, D60,
1 94 Ranger, 2.3, 5spd
1 Lincoln Mark VIII
-
ptodave
- New Member
- Posts: 38
- Joined: Tue Feb 06, 2007 11:13 pm
- Location: California, Azusa
re: 14 U- JOINTS
Well you guys are getting close,
2 front axle
2 front driveshaft
2 rear driveshaft
2 middle shaft
4 pto driveshaft
2 steering shaft
2 front axle
2 front driveshaft
2 rear driveshaft
2 middle shaft
4 pto driveshaft
2 steering shaft
Engage Brain BEFORE Engaging Gears
72 F-250 390, NP435, Dana 24, D60, 14b, 4.88s, detroits, 2 winches, 4x4 40" tires.
72 F-250 390, NP435, Dana 24, D60, 14b, 4.88s, detroits, 2 winches, 4x4 40" tires.
-
71 LONG BED
- 100% FORDified!
- Posts: 1588
- Joined: Wed Jun 14, 2006 7:28 am
- Location: Hamburg, NJ
re: 14 U- JOINTS
I'll take one of the PTO u-joints. 
Since you have so many. 
The one I have that is directly mounted to the PTO itself, is cracked. The PO had a catastrophic PTO shaft failure that riped out the exhaust and spun the shaft in the u-joint and cracked it. The shaft was stuck in the u-joint, so they just torched it off. My dump doesn't dump anymore.
Since you have so many. The one I have that is directly mounted to the PTO itself, is cracked. The PO had a catastrophic PTO shaft failure that riped out the exhaust and spun the shaft in the u-joint and cracked it. The shaft was stuck in the u-joint, so they just torched it off. My dump doesn't dump anymore.
John Member #1549
71 F100 Sport Custom__________1967 F350 Gone, but not forgotten
71 F100 Sport Custom__________1967 F350 Gone, but not forgotten
-
ptodave
- New Member
- Posts: 38
- Joined: Tue Feb 06, 2007 11:13 pm
- Location: California, Azusa
re: 14 U- JOINTS
Do not flame me too bad,I have a 3 piece chevy driveshaft with 2 carrier bearings. It goes from the 435 to the winch in very back of truck. I took one look at those little pto u-joints and said NO WAY. Mine uses 1310 joints never had a problem.
Engage Brain BEFORE Engaging Gears
72 F-250 390, NP435, Dana 24, D60, 14b, 4.88s, detroits, 2 winches, 4x4 40" tires.
72 F-250 390, NP435, Dana 24, D60, 14b, 4.88s, detroits, 2 winches, 4x4 40" tires.
-
19674x4
- Blue Oval Fanatic
- Posts: 903
- Joined: Mon Jun 27, 2005 12:31 am
- Location: Oakland Oregon/Sheridan Wyoming
yea, with out the PTO you still have 10 like mine
good thing they don't all go out at once. $$$$$$$$$$$$$$$$$$$$$$$
and if you have the open knuckle ad two more
good thing they don't all go out at once. $$$$$$$$$$$$$$$$$$$$$$$
and if you have the open knuckle ad two more
My Photo Album
2012 Cummins-the luxury Tow Pig
1967 F-250 highboy 352, np435(((((((sold))))))))) My first true love
1968 F100 SWB. 360, np-435, flatbed, currently acting as a hornest nest and bee hive.
1971 F-100 4x4 Step-side. 360, np-435, 70k origional miles- needs allot of love.
2012 Cummins-the luxury Tow Pig
1967 F-250 highboy 352, np435(((((((sold))))))))) My first true love
1968 F100 SWB. 360, np-435, flatbed, currently acting as a hornest nest and bee hive.
1971 F-100 4x4 Step-side. 360, np-435, 70k origional miles- needs allot of love.