Automatic kickdown lever?

rjewkes · Post by **rjewkes** » Sun Nov 26, 2006 4:35 pm

is the c4 and c6 identical or atleast similiar enough for one to work in place of the other?

If not anybody got a spare c4 kickdown rod?

The parts houses can only get a cable but i don't see a cable working.

fordman · Post by **fordman** » Sun Nov 26, 2006 10:53 pm

if you had some copper tubing you could make one. all you would need to do is bend it slowly to make the curves work right. from the carb to the trans. mash both ends and drill holes in the mashed flat part and you have a new rod.

rjewkes · Post by **rjewkes** » Mon Nov 27, 2006 3:31 am

cool wgat size 5/8" or less like 1/2"

fordman · Post by **fordman** » Mon Nov 27, 2006 10:07 am

1/2 i would say. be careful not to put any kinks in it though. or it won't work properly.

flyboy2610 · Post by **flyboy2610** » Tue Nov 28, 2006 8:13 pm

Are you looking for a rod for the C4 or the C6?

Tim P. · Post by **Tim P.** » Wed Nov 29, 2006 9:27 pm

I have one for a C-6

The FORDification.com Forums

Automatic kickdown lever?

Automatic kickdown lever?

re: Automatic kickdown lever?