dana 60 reassembly

Clutch, transmission, rear axle

Moderators: FORDification, 70_F100

Post Reply
F250MudPatrol
New Member
New Member
Posts: 29
Joined: Fri Oct 27, 2006 4:28 pm
Location: Oklahoma

dana 60 reassembly

Post by F250MudPatrol »

Can anyone give me the proper procedure for properly assembling the 1971 dana 60 rearend? Primarily the gears and axles, along with proper sealants. Thanks in advance.
The truth shall set you free.
Top
User avatar
72hiboy4x4
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 978
Joined: Sat Jan 01, 2005 8:53 pm
Location: As far away as I can be from Wa state, without crossing the Mississippi
Contact:
Contact 72hiboy4x4

Post by 72hiboy4x4 »

are you assembling/setting up the gears into the housing yourself?
In life many men take the path of righteousness, some take the path many others follow (G.M. owners, for example), some take a more arduous path, some a simpler path. I, sir, took the PSYCO-PATH!!
Top
F250MudPatrol
New Member
New Member
Posts: 29
Joined: Fri Oct 27, 2006 4:28 pm
Location: Oklahoma

re: dana 60 reassembly

Post by F250MudPatrol »

Yes, everything except the pinion. I never removed it.
The truth shall set you free.
Top
User avatar
Sharkdance
Preferred User
Preferred User
Posts: 488
Joined: Sun Jul 31, 2005 11:33 pm
Location: Florida, Jacksonville

re: dana 60 reassembly

Post by Sharkdance »

See if this helps: http://www.coloradok5.com/dana60manual.shtml
Its not Ford specific, but there is a LOT of good D60 info there.
Sharkdance
70 F250 2WD 360/C6
Image
Top
Post Reply

Return to “Drivetrain”