Dana 60 axle spline?

snake · Post by **snake** » Thu Jul 20, 2006 4:23 pm

Can someone help me with the axle size (dia) and spline for the Dana 60 rearends??

I don't suppose it would happen to be the same as the Ford 9" 31 spline axles would it??

Thanks!

67heavystepside · Post by **67heavystepside** » Sat Jul 22, 2006 8:43 am

not sure on the diameter or spline, but i do know the dana 60 is a full floating axel and the 9" is not. the full floating axel has either 8 nuts&studs or 8 bolts (depending on the year) holding the axel in.the 9" dosen't.

pat67shorty · Post by **pat67shorty** » Sun Jul 23, 2006 4:14 am

35 spline

heep70 · Post by **heep70** » Sun Jul 23, 2006 2:53 pm

The D60s from our rigs are only 16 spline and the newer Ford bought Danas are 30 spline.

The 16 spline has a 1.18" shaft and at the splines it is 1.30".

I believe the 30 splines are 1.5"

Pat67shorty. I am not for sure but I don't think Ford did 35 spline unless it was above a F350 or special order. I know the military chevies are all 35 splines in the front.

The FORDification.com Forums

Dana 60 axle spline?

Dana 60 axle spline?

re: Dana 60 axle spline?