Converting 240 from manual to automatic. Finding a tranny.
Moderators: FORDification, 70_F100
- Shockway
- New Member
- Posts: 10
- Joined: Tue Jul 11, 2006 9:40 am
- Location: New Mexico
- Contact:
Converting 240 from manual to automatic. Finding a tranny.
Just bought a 67, base model, on ebay. Would like to swap out the 3-on-tree for automatic. Is there a bolt-on tranny for the 240? Cheers,
Strive to meet FAA standards on your truck and drive it forever.
- Shockway
- New Member
- Posts: 10
- Joined: Tue Jul 11, 2006 9:40 am
- Location: New Mexico
- Contact:
re: Converting 240 from manual to automatic. Finding a trann
Thanks, spartman. Would you suggest a C4? Are some transmissions rare? Are there new OEM transmissions I could buy? Cheers,
Strive to meet FAA standards on your truck and drive it forever.
- spartman
- Blue Oval Guru
- Posts: 1278
- Joined: Thu Oct 07, 2004 2:36 pm
- Location: South Dakota, Wallace
C-4 would be just fine for your setup.
The only one that might be considered rare simply cause they are an old transmission and not supported real well would be the FMX.
Not saying the tranny is bad, in fact it is one stout unit, just an older setup and noone really souped up their FMX's so there isn't a lot of demand for aftermarket stuff.
AKAIK There are no OEM's available but I have been known to be wrong occasionally, just ask my wife.
The only one that might be considered rare simply cause they are an old transmission and not supported real well would be the FMX.
Not saying the tranny is bad, in fact it is one stout unit, just an older setup and noone really souped up their FMX's so there isn't a lot of demand for aftermarket stuff.
AKAIK There are no OEM's available but I have been known to be wrong occasionally, just ask my wife.
- Shockway
- New Member
- Posts: 10
- Joined: Tue Jul 11, 2006 9:40 am
- Location: New Mexico
- Contact:
re: Converting 240 from manual to automatic. Finding a trann
Cheers, my good man. Cool forum. On that note, FTE is just too broad for my use. I like this site and am considering Paypal contribution.
Strive to meet FAA standards on your truck and drive it forever.
- Shockway
- New Member
- Posts: 10
- Joined: Tue Jul 11, 2006 9:40 am
- Location: New Mexico
- Contact:
re: Converting 240 from manual to automatic. Finding a trann
Found C4 rebuilder. They have them in stock for $1150.00, somewhat tricked out and dyno'd. Linkage is not provided, of course.
The company, TCIauto, can be found on-line at "tciauto dot com."
Cheers,
The company, TCIauto, can be found on-line at "tciauto dot com."
Cheers,
Strive to meet FAA standards on your truck and drive it forever.
- Shockway
- New Member
- Posts: 10
- Joined: Tue Jul 11, 2006 9:40 am
- Location: New Mexico
- Contact:
re: Converting 240 from manual to automatic. Finding a trann
That's, cool... looking forward then to finding the local junkyards and going on a parts suffari. Cheers,
Strive to meet FAA standards on your truck and drive it forever.
-
- New Member
- Posts: 3
- Joined: Wed Jun 28, 2006 12:49 pm
re: Converting 240 from manual to automatic. Finding a trann
Have you checked Summit and Jegs. They offer TCI's c4 for about $640, with $90 freight shipping. That is going to be hard to beat if you go looking in a junkyard for a questionable core then trying to find a tranny shop that charges a reasonable price and dose a good job too.
You will need to find a bellhousing (beware there are two kinds of common C4's, be sure to get the correct one) and a yoke too, but those are easy to find in any junkyard and are easy to check to see if they are any good.
You will need to find a bellhousing (beware there are two kinds of common C4's, be sure to get the correct one) and a yoke too, but those are easy to find in any junkyard and are easy to check to see if they are any good.
- Shockway
- New Member
- Posts: 10
- Joined: Tue Jul 11, 2006 9:40 am
- Location: New Mexico
- Contact:
re: Converting 240 from manual to automatic. Finding a trann
Thanks, akimmet, that's awsome information. Makes sense. Plus, there's all the work of pulling the junk yard trans. Cheers, -s
Strive to meet FAA standards on your truck and drive it forever.