The guy that had this truck before me was a real Mickey Mouser. I found 3 broken studs in the real Axle hub to hold the axle flange on.
Anybody know where I can get the studs and narrow profile nuts and washers?
Dana 70 Axle Flange Studs
Moderators: FORDification, 70_F100
-
flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
re: Dana 70 Axle Flange Studs
First place I would check would be a suspension shop.
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
-
rdmac
- New Member
- Posts: 22
- Joined: Wed May 10, 2006 10:14 pm
- Location: Tennessee, Martin
re: Dana 70 Axle Flange Studs
if it is like a 9", you can get them at any ford dealer.
rdm
70 f100 lwb 302 3speed/overdrive
71 f100 swb 302 auto
70 f100 lwb 302 3speed/overdrive
71 f100 swb 302 auto
-
kid
re: Dana 70 Axle Flange Studs
Ford dropped the Dana 70 more than 7 years ago and carry no small parts for them anymore. There are the 8 studs in the rear axle hubs that retain the full floating axles. Ford had a falling out with Dana and quit using Dana-Spicer parts of any kind even on the L and N series. They can't sell me the right size in length.